Inspection And Maintenance Of Double-axle Traction Seat Of Tractor

In addition to completing the same items as the single-axis traction seat, the inspection and maintenance content of the double-axis traction seat also needs to pay attention to the following points:
1. Check the integral horizontal and vertical axes. If there is deformation or serious wear, they should be overlay welded to the required size, repaired or replaced with new parts to ensure that the traction base can flexibly swing horizontally and vertically, and the fit clearance should meet the standards.
2. Check the lateral swing angle and the buffer devices on both sides. If the lateral swing angle is too large, adjust it through the wedge blocks on both sides. If the buffer spring or rubber block is aging, replace it with a new one.